Adorable Bunny Tail Garland : The Best Guide

How to Make Your Bunny Tail Garland

Let’s break this down into simple steps that anyone can follow:

Step 1: Decide on Your Garland Length and Pompom Size

Before you start creating pompoms, it’s helpful to determine how long you want your garland to be. I’ve made several garlands of different lengths:

• A 4-foot garland for my window (used about 12 pompoms)
• A 6-foot garland for my mantel (used about 20 pompoms)
• A 10-foot garland for my staircase (used about 30 pompoms)

I prefer spacing my pompoms about 4-5 inches apart, which creates a full look without overcrowding. I’ve found that 1.5-2 inch pompoms create the perfect “bunny tail” size, but you can adjust based on your preference. For my daughter’s room, I once made a garland with smaller 1-inch pompoms, and it looked absolutely adorable!

Step 2: Create Your Pompoms

There are two main ways to make pompoms: using a pompom maker or the cardboard method. Both work well, so choose whichever is more convenient for you.

Using a Pompom Maker:

1. Open both halves of your pompom maker.
2. Wrap the yarn around one half until it’s fully covered. The more yarn you use, the fuller your pompom will be.
3. Close that half and repeat with the other side.
4. Cut along the groove between the two halves using sharp scissors.
5. Tie a piece of yarn tightly around the middle, between the two halves.
6. Open and remove the pompom maker.
7. Trim any uneven edges to create a perfect sphere.

The first time I used a pompom maker, I was amazed at how quick and easy it was. I made 20 pompoms in one evening while watching my favorite show!

Using the Cardboard Method:

1. Cut two identical circles from cardboard, each with a hole in the center (like a donut).
2. Hold the circles together and wrap yarn around them, through the center hole, until the hole is completely filled.
3. Using scissors, cut the yarn along the outer edge, between the two cardboard pieces.
4. Slide a piece of yarn between the cardboard pieces and tie it tightly around the center of your pompom.
5. Remove the cardboard and fluff your pompom.
6. Trim any uneven edges.

I used this method before I invested in a pompom maker, and it works perfectly well. It takes a bit more time, but the results are just as good.

Step 3: String Your Pompoms

Now comes the fun part – creating your garland!

1. Cut your fishing line or ribbon to your desired length, adding an extra 12 inches for hanging and tying.
2. Decide on the spacing between your pompoms (I recommend 4-5 inches).
3. Thread your fishing line or ribbon through each pompom, securing it with a knot if needed.

A trick I discovered after making my first garland: if you’re using fishing line, you can actually push the needle through the center of each pompom where you tied it off. The knot at the center will hold the pompom in place on the line without needing to tie additional knots.

If you’re using ribbon, you might want to secure each pompom with a small dab of hot glue to prevent sliding.

Step 4: Add the Finishing Touches

Once all your pompoms are strung, it’s time for any final adjustments:

1. Make sure your pompoms are evenly spaced.
2. Trim any stray yarn pieces.
3. Add loops at each end for hanging, if desired.

One year, I added tiny bells between some of the pompoms, which created a gentle tinkling sound whenever someone walked past. Another time, I incorporated a few pale pink pompoms among the white ones for a subtle color variation. Don’t be afraid to get creative with your own personal touches!